|
it
newsgroups
|
|||||||||||||||||||||||
|
|||||||||||||||||||||||
Microsoft Windows Server 2000/2003 General Discussionmicrosoft.public.windows.server.general
Blank Password on 2003 domain
Rodger Stronghurst -
21 Oct 2006 9:44 PM - 4 messages
We have a very restricted user account that only has access to their flash drive and MS Word in a separate container, with it's own policy. The default domain policy is disabled. Is there a way to setup a blank password for a domain account on windows ...
Internet traffic monitoring
Phil S. -
21 Oct 2006 5:34 PM - 6 messages
Hi all: I am responding to a senior management panic. I am asking your help on products to present in a meeting. The company I work for has two T1 circuits to the internet plus a third T1 which is an "on-demand-bandwidth" which is expensive time and bandwidth ...
2003 Enterprise Server - System Drive Space
George Bell -
21 Oct 2006 3:13 PM - 3 messages
I'm having to nurse along a server for a few more months with a mere 10GB system drive which is nearing capacity. Has anyone any suggestions as to anything which can be safely removed to clear space? (i.e. Not cleared by a Disk Cleanup) ...
DC Security Policy is resettng on reboot
Sjoram -
21 Oct 2006 1:39 PM - 5 messages
Hi, My DC's Security Policy is resetting on reboot, causing services to fail to start and no network connectivity. I have to run the following command, and then reboot, and everything works, however after the next reboot, I have to do the same again. I ...
What is a T$M temp file?
Baz -
21 Oct 2006 8:22 AM - 4 messages
For the last few nights my server has been running out of disk space on the system partition. Investigation reveals that this is because of a gigantic "T$M" temp file. There's a bunch more tiny "T$M" files, but just one huge ...
Connecting to domain
Doug -
21 Oct 2006 5:49 AM - 2 messages
I am in the processing of installing a Windows Server 2003 R2. How does it relate to Windows Server 2003 and SBS 2003? The server is a domain controller, but I can't connect. Is there a sequence of steps to connect? ...
win2003 server,can access share folder,but cannot list.
Robbin Woo -
21 Oct 2006 1:47 AM - 2 messages
Hi all, We have a server problem after virus affected,clients can access shared directories via \\servername\foldername,but without the foldername,it says access denied,the virus has already been cleared. And use mapping to access shared folders is ok too. ...
Paging File not changing size ...
E-Double -
20 Oct 2006 10:19 PM - 9 messages
On a Win2003 Enterprise server with 2GB of RAM the paging file is set at 3070 (min & max sizes the same and the recommended size). But for some reason when the machine boots it is saying that 5117MB are allocated to the paging file ...
Application crashes in Windows 2003 R2 Server
Don -
20 Oct 2006 8:23 PM - 6 messages
Hi, I have a Visual Basic 6.0 application that runs smoothly on every Windows OS except Windows 2003 R2 Server. I have tested the application in Windows 98, ME, NT, 2000, 2000 Server, XP Pro. The application crashes when I close the ...
Terminal Services
solution -
20 Oct 2006 6:11 PM - 2 messages
When I access outlook in my terminal services account, I am locked out. As It opens, I get the message "Unable to open your default e-mail folders. The file C:\Documents and Settings\(my name)\My Documents\Outlook.pst is in use ...
"Allow logon through Terminal Services" user right missing
ajoaosilva -
20 Oct 2006 5:23 PM - 19 messages
Symptoms: - any administrator can logon to TS; - non-administrator users get “To log on to this computer, you must be granted the allow log on the through Terminal Services right. By default, member of the Remote Desktop User Group have this right. If you are not a ...
Denied Software Installation in GPO
johnisccp -
20 Oct 2006 5:16 PM - 2 messages
My company has a software that require user to be a local admin to their PC. Is there a way to prevent the user with local admin rights to install software in GPO? I play with software restrictions policies but that did not ...
Forest Trust Relationship
Andy -
20 Oct 2006 5:00 PM - 5 messages
I am trying to create a Forest Trust Relationship and need some help. I have followed MSs checklist by configuring DNS with a forwarder, both systems are that the 2003 Forest and Domain level. When I create the two-way trust it ...
How to clean a tape in a backup library using RSM or other
m.piceni -
20 Oct 2006 4:10 PM - 3 messages
Hi, does anyone know a way to programmatically clean a drive in a backup library ? I tryed to mount the cleaning cartridge using RSM mount, but I cannot, because the Cleaning Cartridge is not a standard media: it has 0 sides, and ...
Auditing Logon and Logoff
Ernest -
20 Oct 2006 4:00 PM - 4 messages
How would I enable active logs of all user logon and logoffs on a domain controller? I then want to move the logs to a separate storage area once a day and restart the process. Thanks, Ernest ...
Server 2003 R2 won't shut down
tgtcat6@gmail.com -
20 Oct 2006 3:52 PM - 3 messages
I'm trying to build a Exchange server with server 2003, and I'm having the small problem of the computer not wanting to shutdown or reboot. When I tell it to shutdown or reboot, I it runs through the shutdown ...
Slow response on Domain DFS root
agcastle2000 -
20 Oct 2006 3:24 PM - 3 messages
Hi, We map drive z: to our Domain DFS root \\corp.domain.com\globalshare and lately, these are the issues that our users are facing: 1. It's taking very long time (some users 5 minutes) before the net use z: ...
Win 2003 - Group policy not taking affect
esanborn -
20 Oct 2006 3:11 PM - 9 messages
I have setup new Organizational Units for my users. For one of them, I need the password policy relaxed so that I can have some basic/non-complex passwords for the accounts. I setup a unique GPO and linked to the OU. But, I still cannot change ...
Replacing my existing Win2000 domain controller
Dan DeCoursey -
20 Oct 2006 2:44 PM - 5 messages
I am finally getting my new Windows Server 2003 and it will replace my existing domain controller ... Never did this before could someone give me a checklist of detials ishould be thinking of to tackle this chore ?? ...
where to find boot.ini
Express -
20 Oct 2006 10:12 AM - 4 messages
hi i have win 2003 and exc2003 and need to locate the boot.ini file to edit it. I can seems to find the file. Can someone help me please? I did a searcg also but nothing was found. craig ...
Memory Problem
Fernando Silva -
20 Oct 2006 9:03 AM - 4 messages
In my company i have one server with windows 2003 standard installed and i have one problem with the total memory recognized by the system. The server came with 4 Gb of total memory and everything works fine, but when i upgrade ...
"Access Denied Error" - Scheduler
Customize pages from existing template -
20 Oct 2006 6:42 AM - 4 messages
I have written a application to extract thumbnails for various file types.I have written this application using VB.Net.I am using below functions to extract the thumnail.GetUIObjectOf,GetLocation,Extract functions.You can check the help on these functions in MSDN. ...
Ftp server head ache
tsookoo -
20 Oct 2006 4:30 AM - 2 messages
Good day, been searching for a reason why files are not being displayed when i log into my ftp server. I login and get no listing after typing either ls or dir. Can anyone help me out? ...
System State and Active Directory
Joel Z -
20 Oct 2006 4:20 AM - 3 messages
I am restoring a system volume that crashed on a Windows 2003 server. I have a backup of the drive and it is on SP1. It is a domain controller. How do I restore the system state? ...
Is there any DDS (tape drive) simulator software?
Starriol -
20 Oct 2006 2:19 AM - 3 messages
I need to learn to use Veritas Netbackup fast and to be able to enter to some features I need to have a tape drive connected to the sysytem... so, is the anyway to fool Veritas Netbackup or the OS into ...
drive replacements
ctsguy -
20 Oct 2006 1:05 AM - 4 messages
I have a raid 5 windows 2003 server. The c: partition is 4gb and the rest is 130gb. Both partitions are out of space. I have 3 available slots in the server. I would like to purchase 3 large drives and install in the server. ...
load needed dlls for kernel
Joel Z -
19 Oct 2006 10:54 PM - 2 messages
After replacing a system drive and loading windows in c:\window2 I then used an NT backup and restored the D drive. When I rebooted I got the load needed dlls for kernel. According to article 164448 of microsoft I loaded ...
Windows 2003R2 License Question
Sova -
19 Oct 2006 10:11 PM - 3 messages
Hello, We are planning to buy Windows 2003R2 and I would like to ask your advice about number of licenses that we need to buy. We have 50 users and around 70 computers in our network. Some users use two or more computers in the same ...
W2K3 Server Printer Pooling
Demodog -
19 Oct 2006 7:50 PM - 2 messages
All: Created 2 tcpip ports for hp 4250 p1 and p2 , enabled printer pooling on the port I elected to share (p1). pulled the plug on p1 and sent a print job. why didn't the job come out on p2? ...
Help Need Expert Advice for missing Local Admin 2003 Server
JH -
19 Oct 2006 5:44 PM - 3 messages
sHello, I have come across a situation where the only Administrators on one of my domain controllers is the Domain Administrators. Some deleted in the past the local Admin account. My question is what is the best advice to rectify this ...
CALs for Remote Desktop Access
Dave Booker -
19 Oct 2006 5:15 PM - 2 messages
I bought a boxed copy of Windows Server 2003 x64 "with 5 CALs". I see that I am limited by default to just two simultaneous Remote Desktop sessions. Can I use the 5 CALs included with my software to increase the number of ...
Delayed Write Failures: Patch 910311
Hobbes80 -
19 Oct 2006 4:16 PM - 2 messages
I am experiencing Delayed Write Failures on my Win2k3 servers that are NAS attached to EMC Celerra storage. My software vendor has indicated that i can repair this utilizing Patch 910311, however, I have been unable to find it on ...
What is the policy / proceedure for upgradiong from W2K PRO
John Higson -
19 Oct 2006 2:52 PM - 2 messages
Professional SP4 to Windows Server 2003? Using a trial version of 2003 Sever Sp1 but, incidentally to primary question cannot install R2 ...
Server keeps rebooting
Stevan -
19 Oct 2006 1:42 PM - 6 messages
Hi, I've recently installed Windows Server 2003 & everything has been ok. We then came in one day to find the server constantly rebooting, it goes past the BIOS & checking to boot from CD but when the screen goes ...
Can you install OpenOffice-2.0.4 to Windows 2003 server?
Man-wai Chang -
19 Oct 2006 11:57 AM - 3 messages
I got an error... ...
Ris - How to use MAC instead of GUID for prestaged computers?
resources@news.postalias -
19 Oct 2006 9:48 AM - 4 messages
Hello there, does anyone how to use the MAC instead of the Computers GUID to prestage Clients for RIS-Installation? The background is that I have to image 41 HP DC7600 and I know the Mac of the Clients, but not the GUID. So, I don´t want to open all the boxes and ...
Win Server 2k3 GPO Too Restrictive - Reset?
stuart.oram -
19 Oct 2006 8:43 AM - 5 messages
Hi, I've been configuring my new DC (I'm new to the domain style of networking, always been in workgroup before). Everything has been working fine, until I started to apply group policy, and I think I've ...
User Certificates
Numpty -
19 Oct 2006 8:40 AM - 2 messages
For the use of macros and digital signing of documents, we need to somehow get every user to have their own certificate for this purpose. We can't get the users to go and request their own certificate as the users ...
Setting Permission to user to start a service
ra294 -
19 Oct 2006 8:11 AM - 5 messages
I would like to be able to start and stop Windows services from my web application (ASPNet account). When I tried to start/stop a service , I get permission denied. How do I set the needed permission to the ASPNet account ? ...
Don't have the password of win2000ServerSP4
Express -
19 Oct 2006 8:08 AM - 4 messages
hi all i have the above mentioned server that my boss gave me to rebuild and load win2003 on.I don't know the password of the admin account and neither does he.what do i do? thanks ...
Default Username
JonathanL -
19 Oct 2006 6:34 AM - 4 messages
I've done something to my 2 DC's but didn't record it and can't remember what it was. At the login box in the User name: line, it shows the domain\username. The domain name in the Log on to: line is grayed out unless ...
Running out of space on my C drive
Christopher -
18 Oct 2006 9:36 PM - 3 messages
I have a SBS 2003 server running raid 5 and NTFS...I am running out of space on the c partition and I was wondering if anyone has used the DISKPART utility to expand the partition? ...
Create User Share?
ttt.travis -
18 Oct 2006 8:32 PM - 2 messages
Hi, I have a AD DC setup with about 100 users, the users home directories are organized into folders for each OU, because the users home directory is 2 levels deep it obviously won't mount on windows 98. Currently my map to H: looks like ...
Services Stopping Unexpectedly - again, and again, and again
Modci -
18 Oct 2006 7:45 PM - 16 messages
I'm perplexed. I have a small network running Windows 2003 standard edition server. For about a week now I have serveral services that are normally started automatically are stopping intermitently. When these services stop (IE Workstation) all my users lose access to everything outside of their local ...
Find who is logged on domain
Tim Kelley -
18 Oct 2006 7:20 PM - 3 messages
Is there a command or program that will tell me who is currently logged onto the domain? Thanks, ...
How do I track down the source of this error?
Greg -
18 Oct 2006 7:02 PM - 4 messages
Event Type: Error Event Source: DCOM Event Category: None Event ID: 10004 Date: 10/12/2006 Time: 9:39:17 AM ...
0x0000001a ((0x00003452, 0x00cea201, 0xc0506b24, 0x00000080)
Richard Follett -
18 Oct 2006 5:54 PM - 2 messages
Hi Guys I appear to be having a problem with my SBS server 2003, it would appear that when using the mangagment console, the machine blue screens and gives the following stop error 0x0000001a ((0x00003452, 0x00cea201, 0xc0506b24, 0x00000080). Wonder if anyone else has experienced this or could point me in the ...
Disk Space Tool
Bad Beagle -
18 Oct 2006 5:24 PM - 2 messages
Does anyone know of any MS or 3rd party tools that can document disk volume growth? I am mostly interested in home folders and shared folders. We currently have no limits on our volumes. ...
R2 File Screening
Bad Beagle -
18 Oct 2006 5:22 PM - 4 messages
Can anyone tell me how the file screen monitoring works with R2? Is there a lot of overhead to the server? ...
Question about Windows2003 DNS and DHCP
Galpersonal -
18 Oct 2006 5:05 PM - 3 messages
Hello - We have a web application sitting on a Windows2003 Server that is viewed by wireless WindowsCE4.2 tablets. Our web application has a XML file where we put in the host names of the tablets, so that only certain tablets are able to access the application. ...
Lgion Script for Home Directory
Ron Boetger -
18 Oct 2006 4:30 PM - 3 messages
I have inherited a system with 2 serves using Active Directory. One up and running and one that crashed. We replace the crashed server with a new one. There are 2 facilities one server at each. The new ...
BOOTP Protocol in W2K3 Router
MJS1138 -
18 Oct 2006 3:22 PM - 2 messages
When W2K3 is enabled for LAN routing, will it pass BOOTP packets? I know it can be set as a DHCP agent but this functionality could be repalced if it simply passed the BOOTP protocol. ...
win2k3 server - "reactivate disk" through command line
cute.fluff@gmail.com -
18 Oct 2006 2:30 PM - 4 messages
hello all, i have a small but nagging problem - whenever i restart my server which is connected through iSCSI to external storage, i lose the HD on that storage and i have to manually reactivate it. is there a way to reactivate disk through a command line so i can ...
Need to find out folder permission without having an access rights
B -
18 Oct 2006 2:14 PM - 3 messages
Hi, I posted this question to Windows security access group and they asked me to post it in Windows server general group. I need to list the folder and subfolder security information (such as which person/group has full access, read access etc) for user's data folder. ...
ftp server question
keith -
18 Oct 2006 1:30 PM - 5 messages
i have a 2003 server that runs ftp. i have loaded a 9 gb file that i need a customer to download. when you connect to the ftp site it shows file size as 3.99GB. is there a maximum file size for ftp transfer? if so, can i disable this ...
Netwrok Drive not pulling
pwverber -
18 Oct 2006 12:55 PM - 2 messages
I have a remote user setup with Network drives to share files. He can push files to our server but his laptop will not pull the files that are on our server when syncing. If I create a new folder or file on the server he will ...
Windows Server 2003 Trial Software Expiration
Dave Thompson -
18 Oct 2006 12:39 PM - 6 messages
I just installed the package this morning; downloaded it yesterday.... i guess my clock was wrong and now it has locked me out.... help,,, what can i do? ...
License
Hari -
18 Oct 2006 9:43 AM - 2 messages
Hi! I get this error, I know it has got to do with licensing. I have 3 servers running which when purchased I have got 5 CAL's each. Later i purchased more licenses and have added using the Licensing from the Administrative Tools on ...
Windows 2003 server reboot at logon
manahune -
18 Oct 2006 8:56 AM - 6 messages
Hello, After a crash disk, I had to restore my Windows 2003 from backup. I've restored the full system state and whole disk from our backup tapes. Since the backup I am able to boot the server. But if I try to logon on ...
Win Server 2003 System Drive Failure
Joel Z -
18 Oct 2006 3:18 AM - 5 messages
I have a system drive that failed on a Win2003 Server. I have a current NTBackup of the drive but I do not have ASR. Do I have to install windows 2003 from the CD and then can I restore the C drive or do I have to patch it ...
SUBINACL syntax error
Jeff Vandervoort -
18 Oct 2006 12:52 AM - 6 messages
This has to be embarassingly basic, but it has me stumped... I'm trying to use SUBINACL (v5.2.3790.1180, the latest from the MS downloads site) to search and replace ACEs on a WS2003SP1 server. The command I'm ...
Windows 2003 backup
John -
18 Oct 2006 12:17 AM - 2 messages
Hi I am used to sbs 2003 where you have a thing called server management and in it you can run a wizard to schedule a backup. Does windows 2003 have something similar? How does that work? Can I schedule backups to go to disks ...
Windows Server 2003: Licensing Question
Rodger Stronghurst -
17 Oct 2006 10:26 PM - 3 messages
We are setting up a network with 100 workstations - 15 Staff workstations, where each member of the staff has their own user account, and 85 student workstations. All 85 students will log in to the domain as "student". The question is, how many Windows 2003 CAL's will we need? 16, or 100??? ...
Information about w2k3Server memory management
Trombino -
17 Oct 2006 10:18 PM - 8 messages
Hi all, we are ready to buy a w2k3 small business server license.. but.. we have a question :) We have a 32-bit server (application) to run on this new w2k3server, and we need to allocate it a huge amount of ram (from 2 to 5 Gbytes). ...
Print Cluster
Joshua Graham -
17 Oct 2006 9:50 PM - 2 messages
I have a Windows 2003 server environment and I have 2 file and print servers, not a cluster. I have DFSR on both server and my printers on both server, can I cluster just the printing function of the servers in case 1 is ...
Win2k server errors
Jacob -
17 Oct 2006 9:37 PM - 4 messages
Hi, It's a file server in an NT domain that serves no other functions. Recently I've noticed that the following errors appear quite frequently. Sometimes they occur at the same time. The connection is never cut ...
Problems with CPU (using almost 100%) when I play a Video in Win20
Jimmito -
17 Oct 2006 9:28 PM - 3 messages
With any Video Player (Media Player, RealPlayer, Winmm.dll...) when i reproduce in full screen a video i got almost de 100% of use of CPU. I got problems because the server is so slow processing any task. What video Player ...
Move Certification Authority
Wes -
17 Oct 2006 8:33 PM - 2 messages
I have a Win2003 server that has the Certification Authority installed on it that I want to rename. It was originally named for its primary function (Exchange) but exchange is now on another server. I would like to transfer the Cert. Authority to another server (with a different name) so I can change ...
CAL questions
djc -
17 Oct 2006 8:22 PM - 4 messages
1) if I already have say 50 CALs for windows 2000 and I am about to setup a new windows server 2003 machine (within the same domain), do I need to get new CALs? 2) similar to number 1, if I already have 50 Exchange 2000 CALs and I am ...
sites in IE maintenance GPO not applied
akafritz -
17 Oct 2006 6:53 PM - 3 messages
I'm trying to troubleshoot why several Intranet trusted sites specified in a GPO under Internet Explorer Maintenance, Security, aren't showing up in IE. I've done a bit of reading and played around with several things, but nothing seems to work. The most obvious is the setting in the policy ...
Scripting the use of Diskpart?
Corey_in_Canada -
17 Oct 2006 6:45 PM - 7 messages
Is it possible to create a batch file that will reconnect a dynamic disk through diskpart? To reconnect a dynamic disk the following commands are necessary diskpart select disk X online That command would and does bring an offline dynamic disk back online. ...
Mozilla/Firefox Problems with Certificate Services
Jeremy_SSC -
17 Oct 2006 6:41 PM - 4 messages
My environment: --------------------- Windows Server 2003 Standard SP1 server running Certificate Services configured as the root stand-alone CA My situation: --------------------- Mozilla/Firefox users are accessing the certificate services web enrollment site on the above server and are attempting to apply for web browser ...
1680 X 1050 resolution
chris.bell -
17 Oct 2006 5:58 PM - 4 messages
Just got a Dell 20" widescreen and am unable to set the 1680 x1050 native resolution. Is there an option or ini file that I can manually change it? The option isn't available in the normal display properties. ...
win2k3 upgrade
Paul -
17 Oct 2006 5:32 PM - 4 messages
Hello, we are in the process of migrating our file server from windows 2000 to windows 2003. Just wanted to know if there any issues in going and restoring the files from backup to the new win2k3 server or should I be using ...
Licensing question
kkantchev@hotmail.com -
17 Oct 2006 3:55 PM - 6 messages
Hi everyone, I have license keys for both W3K Standard and W3K Standard R2. I have media only for W3K Standard. I want to install W3K Standard R2. What do I do? Thanks ...
Robocopy Performance
Bob Arco -
17 Oct 2006 3:55 PM - 2 messages
I am using Robocopy to copy files between two DC/File Servers at two sites. The sites are connected by a 768kbps VPN. If I copy a 235MB directory using Windows Explorer, it takes about an hour, as expected. If I copy the ...
Help, need a VBScript
Clayton Sutton -
17 Oct 2006 3:32 PM - 16 messages
Hey everyone, We are running a Windows 2003 domain and Win2k and Win2k3 workstations. I need a vbscript to add a domain acct. to the LOCAL Admin acct. to ALL of our workstations. Can anyone help by pointing me in the right direction where I ...
Uninstalling SP1
Dee -
17 Oct 2006 3:08 PM - 2 messages
I tried to install SP1 on Windows Server 2003. It ran out of disk space during the install and cancelled the setup. I tried to run the uninstall for SP1. It said that the drivers for the Logical Disk Manager may have changed ...
logging out
Axel -
17 Oct 2006 12:36 PM - 3 messages
In Windows explorer if I enter "\\<servern name>" and press Enter I'm prompted for a user name and password. If I successfully manage to log in I can access the folder and files according to the rights of the user I logged ...
Windows 2003 Reboot Issue After OS Update Process
MR-KEN -
17 Oct 2006 11:53 AM - 4 messages
Has anyone noticed the following? You Remote Desktop into a Windows 2003 server Install the OS updates When prompted to reboot you do Your RD session ends But the server never reboots (yet you can't get back in via RD) ...
New Windows Server 2003 R2 DC problems
Jason -
17 Oct 2006 10:10 AM - 3 messages
Hello all, Accept my apologies for beign so long winded here, but I want to give all information possible in hopes someone can help me in this situation. I recently had a Windows 2000 Domain controller (single DC/single site) ...
Is it possable to move a 2003 install to a new server ?
Me -
17 Oct 2006 8:22 AM - 12 messages
Hi, Just trying to prep for a new(er) server that will be coming in about a week or so. I got stuck with low end hardware to setup this network and so far, I have a 2003 DC with Exchange on it, on a very slow, home built machine. It's ...
ms06-061
yls177 -
17 Oct 2006 7:30 AM - 3 messages
Hi I have a list of MSxml files in my servers. I dont know whether to apply [link] to my servers. From [link], i can get ...
Network Share
jkelly -
17 Oct 2006 7:21 AM - 3 messages
We have a Windows 2003 Server with SP1 installed. There is a mapped drive which contains a file eg filename.xls which all users can access on their workstations. Recently we have started having problems when users open this workbook ...
Upgrading from 2003 Standard to 2003 Enterprise
stnick -
17 Oct 2006 5:20 AM - 3 messages
Does anyone know how to accomplish this? According to the MS site it is a supported upgrade path, but I cannot get it to work. I keep getting a dual-boot, with both Standard (existed previously at c:\winnt) and ...
Moving the Hardrive
gmaccombe -
17 Oct 2006 2:51 AM - 4 messages
I'm starting to have intermittant hardware failure on one of my WIN2K3 Standard (no AD, No Exchange ect) Boxes (this is my ISA Server) it's either MB, RAM, or CPU (not to bore you with the details) I want to ...
Unable to explore local C:\ Drive
Minga -
17 Oct 2006 1:54 AM - 16 messages
When I try to explore the C:\drive on a Server 2003 it hangs for a bit and then gives me the folowing msg:- These files are Hidden. This folder contains files that keep your system working properly. You should not modify its content. ...
Update Messed Up Local ISP Connection
Candy -
16 Oct 2006 10:47 PM - 2 messages
I have a question that I know probably doesn't belong here, but there are so many groups to choose from. If someone needs to, please move this email to the right group, but please tell me where it is. ...
Help ----------------- Server 2003 Setup.....!
Scott -
16 Oct 2006 9:31 PM - 6 messages
I work for a small boat repair shop, my boss (cheap x 1000) has put me in charge of this detail, I have some experience but could use some help. I need to connect all workstations to our server and use as file server, ...
Server kicking users off after 8-10 hours.
Ross Taylor -
16 Oct 2006 8:52 PM - 8 messages
Hello, In our small business with only four users, we have a Windows 2003 server we use as a file/web/active directory server. I have all the user accounts set for access 24/7/365, yet it seems that sessions can only be sustained for ...
Remote Desktop doesn't work with Windows 2003 w/SP1
stckaye -
16 Oct 2006 8:39 PM - 3 messages
I'm troubleshooting a developer's desktop running Windows 2003 Server Enterprise. With SP1 installed, Remote Desktop fails with an SAS window: winlogon.exe error. Text is "The exception Single Step - A single step or trace operation has just been completed. (0x80000004) ocurred in the ...
Server does not use alternate dns
DJ -
16 Oct 2006 8:09 PM - 4 messages
My Windows 2003 servers fail to switch to their alternate DNS server when the preferred server is down. However, my Windows 2000 servers do switch to the alternate when the preferred is down. When the preferred DNS server is down ...
finding security groups in folders
joe schmo -
16 Oct 2006 6:09 PM - 3 messages
I need to replace one security group(DLS) with another(GS). Is there a way or program where I can type in a security group and it will list the folders that contain that? any help much appreciated. other wise i have to do this manually folder by ...
Normal usage of page file?
Rick -
16 Oct 2006 5:50 PM - 3 messages
I've got a new server with 4GB of RAM. I've set the page file to system managed size. The server is not yet in production, yet it shows in task manager PF Usage of 1.27GB, while it shows there to be over ...
Good backup solution
GoBruins -
16 Oct 2006 5:26 PM - 8 messages
hi all, i'm pretty new to networks, but i've been put in charge of backups for a smallish, but growing, 2003 server network (about 10 workstations). the first thing i need to do is come up with a good backup solution. ...
Licensing Mode
Brian Houghtby -
16 Oct 2006 5:22 PM - 3 messages
I'm an old native Novell guy setting up a 2003 server. This one is going to be one of 4 2003 servers in our environment. It will have sql server on it and will be used primarily as a database server for our ERP system. One of ...
Still fighting folder permissions
Dave Mc -
16 Oct 2006 5:17 PM - 7 messages
I want to create a folder on my 2003 server, shareit, and grant read only permissions to all users. Then I want to create sub-folders which may have different permissions. For instance, I want to create a subfolder which is read-only to all but one user ...
PAGEFILE LOCATION
Hector Cortes -
16 Oct 2006 4:14 PM - 4 messages
Hi, for a dump analisis, pagefile.sys could be located on a system partition? Can I put a pagefile.sys on second partition and recover a crash dump? thank for your attention Héctor ...
User cant map to his folder on shared server
Outbacker -
16 Oct 2006 3:35 PM - 3 messages
Newbie here. I think when Windows autodated the server and rebooted, he might of logged on at the same time it was rebooting, and, as luck would have it, kept him from connecting to his folder on the shared server. A reboot ...
Deleted items not going to the recycle bin
Boxwell -
16 Oct 2006 3:12 PM - 2 messages
When I delete something from a folder in My Docs it does not go to the recycle bin. Yet deleting from anywhere else it does. I am running Windows XP with the My Docs folder synchronizing with a share on the Windows Small ...
|
|||||||||||||||||||||||